FLEXSEAL PROTECTOR DATA SHEET |
Sentapol Synthetic
and Natural Polymer Industry and Trading Co. Inc.
Date of Issue: October , 2006, Flexseal SG
|
| |
1. DEFINITION:
Developed for mineral structured surfaces, water and
pure silicon resin based penetrating sealer. |
| |
2. PROPERTIES:
Penetrates efficiently on all mineral based surfaces
(i.e. concrete, mortar, auto claved- aerated concrete,
and natural stone) and prevents capillary water absorption.
While preventing accumulation of dirt, it also resists
mildew and fungi growth on the surface.
|
| |
3. USES:
As a protector sealer on natural stone to insure the
longevity of historical restorations. It is also used
to prevent water absorption on all mineral structured
surfaces (cement based) which are exposed to water.
|
| |
4. APPLICATION METHOD:
Apply without diluting with a brush or roller after
removing all dust, dirt or old paint on the surface.
For better protection re-apply a second coat as soon
as the first coat is absorbed by the application surface.
Note that the application of the second coat will result
in a glossier surface.
|
| |
5. TECHNICAL SPECIFICATIONS:
5.1 Appearance :
Transparent – Mat
5.2 Color
: liquid
5.3 Solids % :
Minimum %25 weight percent
5.4 Specific Gravity : 1.01gr/cm3
5.5 Shelf life :
Minimum 1year in original un-opened packaging at 25
C0 room temperature.
5.6 Flash Point :
Non-Applicable
5.7 Drying Time :
1 day (24 hours)
5.8 Diluting Agent/ Ratio : Non- Applicable, Ready to
use
5.9 Coverage :
14 – 16 m2 per 1 liter on most surfaces
|
|
| |
