Flex C Ment Turkiye - Concrete Overlay Systems
Home Page
Quick Brick
Overlay Systems
Vertical Stamping
Flex-c-ment Stamps
Gallery
Training
Distributors & Installers
Color Chart
Color Recipes
Ready-Mix Concrete Stamps
Technical Information
Technical Tests
Sitemap
Contact Us
References
RSS Valid 2.0

AustriaPolish
 

Copyright 2013 Flex C Ment Turkiye.

MATERIAL SAFETY DATA SHEET

Sentapol Synthetic and Natural Polymer Industry and Trading Co. Inc.
Date of Issue: October , 2006, Flexseal SG


 
I . IDENTIFICATION OF THE SUBSTANCE/PREPERATION AND THE COMPANY
Flexseal SG ,Solvent-based acrylic varnish
Sentapol Synthetic and Natural Polymer Industry and Trading Co. Inc.
41700 KOCAELI
TEL: + 90 262 754 57 17
In case of emergency: + 90 262 754 57 21
 

II . COMPOSITION/ INFORMATION ON INGREDIENTS

No   weight (%)
1 Modified acrylic resin 54-56
2 Solvent mixture 41-43
3 Additives 1-5
 
III. HAZARD IDENTIFICATIONS
Flammable. Harmful by inhalation. May cause sensitization by inhalation. Repeated exposure may cause skin dryness or cocking.
 
IV. FIRST AID MEASURES
In case of eye contact rinse carefully and thoroughly with water and seek medical advice. In case of skin contact wipe off mechanically and wash affected areas thoroughly with soap and plenty of water. In case of irritation of the respiratory tract or swallowing, consult a doctor.
 
V. FIRE-FIGHTING MEASURES
Extinguishing Media: CO2, foam, dry powder; in case of larger fires, Water spray should be used. In case of fire, formation of Carbon Monoxide is possible. Firemen have to wear self-contained breathing apparatus. Do not let enter contaminated extinguishing water into soil, ground water or surface waters.
VI. ACCIDENTAL RELEASE MEASURES
Do not empty into drains. Remove sources of fire, ensure adequate ventilation/exhaust ventilation. Keep unauthorized person away.
Remove mechanically; cover remainders with wet absorbent material (e.g. Sawdust,woodpowder, chemical binder based on calcium silicate hydrate, sand).
After approx one hour transfer to waste container and do not seal. Keep dump in a safe ventilated area for several days. Afterwards, eliminate by incineration.
 
VII. HANDLING AND STORAGE
Keep container dry and tightly closed in a cool and well ventilated place. Further information on the storage conditions which must be observed to preserve quality can be found in our product information sheet.
Ensure adequate ventilation or exhaust ventilation in the working area.
Exhaust ventilation necessary if products sprayed.
Avoid contact with skin and eyes.
Provide adequate ventilation and if necessary, air extraction in working areas. Explosion protection required.
 
VIII. EXPOSURE CONTROLS/PERSONAL PROTECTION
For exposure controls see chapter 14.
Wear suitable protective clothing, protective gloves and protective goggles/mask. Respiratory protection required in insufficiently ventilated working areas and during spraying. An air-fed mask, or for short periods of work, a combination of charcoal filter and particulate filter is recommended.
In case of hypersensitivity of the respiratory tract (e.g. asthmatics and those who suffer from chronic bronchitis) it is inadvisable to work with the product. Symptoms affecting the respiratory tract can also occur several hours after overexposure.
Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at end of the work. Keep working clothes separate. Take off immediately all contaminated clothing.
 

IX . PHYSICAL AND CHEMICAL PROPERTIES

Form viscous clear liquid
Colour gardner Lovibond 2 max
Odor Smell of solvent
Initial boiling point Approximately 109 C
Density Approximately 910 kg/m at 20 C
Viscosity Approximately 300-500 mPa. s at 23C
Solubility in water Insoluble
Flash point ? 28 C
Evaporation rate (BAC=1) ? 1

 
X. STABILITY AND REACTIVITY
Hazardous decompositions products: No hazardous decomposition products when stored and handled correctly.
No reaction with water and organic solvents.
 
XI. ECOLOGICAL INFORMATION
Do not allow to escape into waters, waste water or soil.
 
XII.DISPOSAL CONSIDERATION
The relevant EU Directives and local, regional and national regulations must be complied with may be incinerated in a suitable facility provided local regulations are observed. After final product withdrawal, all residues must be removed from containers (drip-free or paste free). Once the product residues adhering to walls of the containers have been rendered harmless, the product and hazard labels must be invalidated. Containers must be recycled in compliance with national legislation and environmental regulations.
 

XIII. TRANSPORT INFORMATION

GGVS/IMGD Code 3,2
UN NO 1263
MFAG 310
EMS 305
PG 111
MPO No
GGVE/GGVS Class 3 No 31 C
RID/ADR Class 3 No 31 C
Warning Sign Hazard no: 030 Substance no: 1263
ADNR Class 3 No 31 C
CAT-ICAO/IATA-DGR 3 1263 111

Limited quantity regulation applicable in accordance with a marginal number GGVE/RID/GGVS/ADR/ADNR in compliance with threshold value.
Declaration for land shipment: 1263
Declaration for sea shipment: Paint and related materials
Declaration for shipment by air: Paint and related materials
Other information: Flash point + 28 C. Keep dry. Keep separated from foodstuffs

 

XIV. REGULATORY INFORMATION
Labeling in accordance with directive 88/379/EEC (preparations) and its amendments and adaptations.
Symbol: Xn
Hazard description: Harmful
Contains:xylene
R10 flammable
R20/21 harmful by inhalation and in contact with skin
R36/37/38 irritating to eyes, respiratory system and skin
R42 may cause sensitization by inhalation
S23 do not breathe vapor/spray
S24 avoid contact with skin
S26 in case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S28 After contact with skin, wash immediately with plenty of water
S36/37 wears protective clothing and gloves
S51 use only in well ventilated areas