|
|
 |
 |
Start with a clean wall surface.
That’s it; no other surface preparation is need.
Primer application
Using a roller, apply the primer over the
entire area, as you would paint.
Mix Flex-C-Ment Wall Mix and water onsite
using a mortar mixer or paddle mixer.
Using a trowel, apply a scratch coat of the
mix to a thickness of 3mm
After the scratch coat dries, trowel-apply
one or two coats of the overlay material until the desired thickness is
achieved.
While the overlay is still workable, stamp
or sculpt as desired.
Stamping the overlay
After the overlay dries, apply color or
other finishing touches. Finish with a coat of clear sealer for added
protection.
|
|
|
|
