Water Repellent WR for Brick and Mortar
A partially penetrating, water repellent liquid
for the protection of cementitious or brick surfaces. Application can
be carried out by spraying or by brushing. The material forms a
protective membrane which is water repellent. It also helps in curing
of concrete and decreasing efflorescence.
Chemical Properties :
|
Appearance
|
White
emulasion
|
|
pH
|
8
- 9
|
|
Chloride
|
None
|
Directions for use :
SoftHARC WR is ready to apply, however it can be diluted with clean
water in a ratio of 1.1 for better penetration. If diluted, application
of a second coat is recommended.
Packing :
Available in 3.0 Kg and 30 Kg polyethylene drums and bulk.
Handling and Storage :
Shelf life is one year if stored between 5 - 30 oC.
Do not store below 0 oC for long periods.
Health Concerns :
· Alkaline
materials can seriously damage eyes therefore eye protection is
strongly recommended.
· Alkaline
materials are also harmful to skin hence use of protective gloves are
recommended.
· Keep
away from children and animals.
Disclaimer :
The information given here is based on our best knowledge and
laboratory studies as well as our field experience. No responsibility
can be accepted by the manufacturer where the conditions of uses are
beyond our control.
|