StoneCARE REFINE

Water Based liquid protector  suitable for all natural stones with medium  or high porosity. Partially penetrating liquid provides  a wet look and / or shining effect based on the type of stone it is applied on. Suitable for any climate and outdoor use . Also provides excellent water repellent characteristic to the surface applied.

Coverage :
A bottle of StoneCARE Refine is sufficient for the treatment of 3 - 15 m² surface depending on the porosity of the surface, the application method and the temperature

Application Instructions :
(Read the entire label before use)

·  Shake well and test the product on a small area before the initial use.

·  Application surface must be dry, clean and free from dust and excess debris.

·  Use soft brush or paint pad and rub the StoneCARE Refine into the surface. Usually one treatment is sufficient but if required a second coating can be applied after drying out of the first coat.

·  For the multi-coat applications, leave 15 minutes minumum between the two applications. After each coat, remove excess amount by using a clean damp towel or sponge.

·  The applied surface will be ready for foot traffic in 6 hours. The total cure will be completed in 24 hours. Keep the application surface free of dust, dry and clean.

Chemical Properties:

Packing :
1 Quart (976 Gr) bottles - 20 bottles in a cardboard box.
30 Kg polyethylene drums.

Coution :

·  KEEP AWAY FROM CHILDREN AND ANIMALS.

·  Close the bottle after each use. Store only in its original package.

·  The storage temperature is between 4 - 38 ^o C. Protect the package from direct sunlight.

·  Avoid from direct contact with skin, eye and food during storage and application.

Eye contact : Flush thoroughly with plenty  of water.
Skin contact : Wash with soap and water.
Inhalation : Move person to fresh air.
Swallowed : Do not induce vomitting. Drink 3-4 glasses of water and call a doctor immediately. Seek medical attention if irritation persists.

Disclaimer :
The information given here is based on our best knowledge and laboratory studies as well as our field experience. No responsibility can be accepted by the manufacturer where the conditions of uses are beyond our control.