StoneCARE REFRESHER

Water based cleaner and protector . It is suitable for all natural  and man-made stones and can be used to remove fresh stains or provides stain protection with periodic use. Forms a stain repellent layer on the surface . (Compatible with all water based sealers like StoneCARE Seal)

Coverage :
A bottle of StoneCARE Refresher is sufficient for the treatment of 10 - 30 m² surface depending on the porosity of the surface, the application method and the temperature.

Application Instructions :
(Read the entire label before use)

·  Shake well and test the product on a small area before the initial use.

·  Use soft brush or paint pad and rub the chemical into the surface.

·  Spray a  sufficient amount of StoneCARE Refresher over the surface and wipe up with mop, sponge or clean dry towel. If the area is heavily soiled, repeat application again.

·  To maintain your stone's natural beauty, use StoneCARE Refresher frequently or immediately after any stain has  occurred.

Coution :
KEEP AWAY FROM CHILDREN AND ANIMALS.

·  Close the bottle after each use. Store only in its original package.

·  The storage temperature is between 4 - 38 ^oC. Avoid storing in direct sunlight.

·  Avoid  direct contact with skin, eye and food during storage and application.

Eye contact : Flush thoroughly with plenty amount of water.
Skin contact : Wash with soap and water.
Inhalation : Move person to fresh air.
Swallowed : Do not induce vomitting. Drink 3 - 4 glasses of water and call a doctor immediately. Seek medical attention if irritation persists.

Click here to contact us now via email

Phone: 0090-2164578047