StoneCARE REMOVER

This material has been designed for the protection of natural stones and mosaics and ceramic tiles during their installation, from staining by the grouting materials and other contaminants. Stone tiles are coated with Stonecare REMOVER before installation and left to dry. This creates a protective water soluble film on the tiles. When grout is hardened completely, the surface is washed with water to remove the protective film together with the contaminants on the tiles without the necessity of scrubbing.

Application :

·  Apply Stonecare REMOVER with a soft brush or paint pad over the top side of the tile evenly. Make sure that the whole surface is coated. Leave to dry for about 1 hour.

·  Do not expose the tiles to water after the application of Stonecare REMOVER.

·  Complete the installation and grouting as usual

·  After complete drying of the grout (at least 8 hours), wash the surface with plenty of water, rubbing lightly with a soft sponge

Chemical Properties :

Packing :
1 bottle - 20 bottles in a cardboard box.
30 Kg polyethylene drums.

Handling and Storage :
Shelf life is at least 1 year if stored at temperatures between 5 - 35 ^oC. Avoid freezing.

Health Concerns :

·  Alkaline materials can seriously damage eyes therefore eye protection is strongly recommended.

·  Alkaline materials are also harmful for skin therefore use of protective gloves are recommended.

·  Keep away from children and animals.

Disclaimer :
The information given here is based on our best knowledge and laboratory studies as well as our field experience. No responsibility can be accepted by the manufacturer where the conditions of uses are beyond our control.